TOIT Training

Facebook X-twitter Linkedin Instagram
Menu
Beginner
Placeholder
Cisco – CCNA

Cisco CCNA: Implementing and Administering Cisco Solutions

Overview
Curriculum
  • 20 Sections
  • 52 Lessons
  • 40h Duration
Collapse All
Network Fundamentals hrlo
3 Lessons
  1. Devices
  2. Topologies
  3. OSI and TCP Models
Switch Fundamentals
2 Lessons
  1. MAC Address Table
  2. Frame Forwarding
Routing Fundamentals
2 Lessons
  1. Routing Table
  2. Packet Forwarding
IPv4 Addressing and Subnetting
3 Lessons
  1. Binary
  2. IPv4 Addressing
  3. IPv4 Subnetting
Cisco IOS
1 Lesson
  1. Navigating and Using the Cisco Operating System
Advanced Routing
3 Lessons
  1. Static Routing
  2. Dynamic Routing
  3. OSPF
VLANs and Trunks
2 Lessons
  1. Creating and Verifying VLANS
  2. Creating and Verifying Trunks
InterVlan Routing
3 Lessons
  1. Router-On-A-Stick
  2. SVIs and Routed Ports
  3. First Hop Redundancy Protocols
Spanning Tree Protocol
4 Lessons
  1. Understanding STP
  2. Configuring RSTP
  3. Manipulating the STP Topology
  4. PortFast and BPDU Guard
EtherChannel
1 Lesson
  1. Configure and Verify EtherChannel Bundle
DHCP and NTP
4 Lessons
  1. Configure a Router as a DHCP Server
  2. Configure a Router as a DHCP Relay Agent
  3. Configure a Router as a DHCP Client
  4. Configuring and Verifying NTP
CDP, LLDP, Syslog, and SNMP
4 Lessons
  1. Overview of CDP
  2. Overview of LLDP
  3. Overview of Syslog
  4. Overview of SNMP
QoS
1 Lesson
  1. Introduction to QoS
Security
5 Lessons
  1. Security Overview
  2. Securing the Console Port
  3. Securing the VTY Lines
  4. Configuring SSH
  5. VPN Overview
Port Security, DHCP Snooping, Dynamic ARP Inspection
3 Lessons
  1. Configuring and Verifying Port Security
  2. Overview of DHCP Snooping
  3. Overview of DAI
ACLs
1 Lesson
  1. Configuring and Verifying Standard and Extended IPv4 ACLs
NAT
4 Lessons
  1. Configuring and Verifying Static NAT
  2. Configuring and Verifying Dynamic NAT
  3. Configuring and Verifying PAT
  4. Configuring and Verifying Dynamic PAT
Wireless
1 Lesson
  1. An Introduction to Wireless
Automation and Programmability
3 Lessons
  1. An Overview of Automation and Programmability
  2. Exploring Controler Based Networks
  3. An Introduction to DNA Center
IPv6
2 Lessons
  1. An Introduction to IPv6 address
  2. An Introduction to IPv6 routing

 

The Implementing and Administering Cisco Solutions (CCNA) course is the first step into Cisco networking. The goal of this online training course is to provide students with skills like network fundamentals and access, IP connectivity and services, security fundamentals, and more! Students who have attended the CCNA online training course will gain competency with Cisco IOS-based devices. Crucial elements of this course include the coverage of IPv4 subnetting, IPv6, ACLs, VLANs, as well as static and dynamic routing which are all needed for success at all levels of Cisco certification.

Deleting Course Review

Are you sure? You can't restore this back

Course Access

This course is password protected. To access it please enter your password below: